Important deformations are indicated by red arrows. Figures 2 and 3 show a set of HRTEM images for the hybrid nanostructures prepared by dip-coating (Au-CNT-A) and drop-casting (Au-CNT-B), respectively. In Figure 2, Au-CNT-A, it is possible to note that the nanoparticles acquire different sizes and shapes. A detailed examination A-769662 in vitro revealed that these Au nanoparticles have indeed a face-centered cubic structure and dominant facets consistent with the (111) orientation of the crystal planes (2.35 Å interlayer spacing) [45]. Particularly, Figure 2c exhibits a fivefold twinned structure suggesting a decahedral shape [46, 47]. In this

last figure, we have inserted a view of a decahedral polyhedron to compare similarities with the NPs shapes in the HRTEM image. From Figures 2d and 3a,b, it is possible to verify that the AuNPs are attached to the inner wall of the click here nanotubes. These AuNPs are surrounded by a C onion-like shells, well attached to the CNT inner walls, as it has been verified previously [48]. These NPs, grown inside CNTs, can acquire the surrounding carbon layers by a relatively low-temperature activation process. Figure 3d shows an improved view of the structural order of the nanocrystals. In the same figure, the interlayer spacing of the encapsulated AuNPs

has been highlighted, and again the (111) crystal plane is the dominant facet orientation. selleck kinase inhibitor Figure 2 HRTEM images of the hybrid nanostructures prepared by dip-coating (Au-CNT-A). (a-d) Individual gold nanoparticles. (a) An onion-like carbon shell surrounding the AuNP. (b, c) The interplanar spacing, consistent with Au fcc,

is highlight with red lines. The insert in (c) shows the shape of a decahedral object to allow comparison with the HRTEM image. Figure 3 HRTEM images of the hybrid nanostructures prepared by drop-casting (Au-CNT-B). (a-c) The surrounding C shell and the AuNP-CNT interface can be observed. (d) Interlayer spacing of 0.235 nm is consistent with fcc (111) planes in Au. From these images (Figures 1, 2, 3), it is then clear that gold nanostructures can be grown selectively inside the CNTs and attached to the inner walls. In this particular synthesis procedure, ions have the unique possibility of diffusing inside the CNTs through the open ends. After a calcination-reduction process, the gold salt ADAM7 agglomerates into zerovalent gold nanostructures inside the nanotubes. Our results indicate the lateral extent of the particles can be either limited by concentration of the Au precursors or by the tube’s inner diameter when this concentration is high enough. We have also noted that during the formation of larger nanoparticle (Au-CNT-B), part of the CNT wall shrinks around it, causing important deformations as we indicated by arrows in the Figure 1c. In some cases, those particles appear to be outside the tubes, but closer observations indicate they are actually encapsulated by the CNT wall.