Alkaline extraction of NADH was carried out using the protocol of Caruso et al. (2004), with some modifications. Briefly, a 20-mL aliquot from Xcg cultures grown in LB or RSB for 18 h was centrifuged at 12 500 g for 10 min at 4 °C. The cell pellet was DAPT order washed once with 20 mL phosphate-buffered saline (PBS; 10 mM, pH 7.5) and suspended in 2 mL of chilled KOH (0.5 M). Two volumes of cold milliQ water was added to this alkaline suspension, which was then vortexed for 2 min. The mixture was centrifuged at 12 500 g for 40 min at 4 °C. The supernatant was collected and neutralized by adding 10% volume of KH2PO4 (1 M, pH 6.5). The sample was filtered through a 0.22-μm

filter (Millipore, Bedford, MA) and analyzed using HPLC (Waters, Milford, MA). The C18 column (dimension: 150 × 4 mm) was used for analysis. The sample was loaded into a vial of the autosampler. The mobile phase consisted of buffers A and B [A: 0.1 M KH2PO4, pH 6.0; and B: 0.1 M KH2PO4 (pH 6.0) having 10% (v/v) methanol)]. Buffers were filtered through a 0.22-μm filter

(Millipore) and degassed. Before beginning the analysis of samples, the HPLC system was equilibrated with 50% buffer A/50% buffer B for 30 min. The flow rate was adjusted to 1 mL min−1. The samples were analyzed using the binary gradient (Caruso et al., 2004): 100% buffer A for 2 min, followed by sample injection, 100% buffer A for 5 min, 0–25% buffer B for 6 min, 25–60% buffer B for 2.5 min, 60–100% buffer B for 5 min, 100% buffer B for 7.5 min, and, lastly, 100% selleck kinase inhibitor buffer A for 2 min to

equilibrate the system for the next analysis. The detection of NADH was carried out by measuring the absorbance at 254 nm (Waters 996 Photodiode array detector). Acid extraction of ATP and ADP was carried out based on the method of Giannattasio et al. (2003). Briefly, a 20-mL aliquot from Xcg cultures grown in LB or RSB for 18 h was centrifuged at 12 500 g for 10 min at 4 °C. The cells were washed once with 20 mL PBS (10 mM, pH 7.5) and the pellet was suspended in 4 mL of chilled perchloric acid (0.5 M). The cell suspension was sonicated for 3 min and incubated for a further 45 min with vigorous shaking at 10-min intervals. The acid extract was neutralized with 0.8 × 0.5 M KOH and 0.2 × 1 M KH2PO4 (pH 7.5) and kept MTMR9 on ice for 15 min. The potassium perchlorate precipitate was finally removed by centrifugation (12 500 g for 30 min at 4 °C). The supernatant was filtered through a 0.22-μm filter (Millipore) and subjected to HPLC analysis (Waters) using the C18 column (dimension: 150 × 4 mm). Samples were loaded into a vial of the autosampler. The mobile phase consisted of buffers A [0.1 M KH2PO4, pH 6.0; and 8 mM tetrabutylammonium hydrogen sulfate (TBA)] and B [0.1 M KH2PO4, pH 6.0; 8 mM TBA, and 30% (v/v) acetonitrile].